Opening lecture  Session 1[1] Abstract Akihisa Inoue Attractiveness and Commercialization of Zr- and Fe-based Bulk Metallic Glasses A. Inoue, F. L. Kong, S. L. Zhu, Al-Marzouki
Invited talk Session 1 Abstract Michael Joseph Kaufman STRATEGIES FOR PRODUCING STRUCTURAL, HIGH-TEMPERATURE ALUMINUM ALLOYS USING RAPID SOLIDIFICATION METHODS F. G. Coury, J. Jankowski, A.J. Clarke, W.J. Botta, C.S. Kiminami, C. Bolfarini and M.J. Kaufman
Invited talk Session 1 Abstract Thomas Jay Webster 15 Years of Commercializing Medical Devices Using Nanotechnology Thomas J. Webster
Regular talk Session 1 Abstract Juliano Soyama MICROSTRUCTURE FORMATION AND WEAR RESISTANCE OF SPRAY FORMED DUPLEX STEELS CONTAINING BORON J. Soyama, T.P. Lopes, G. Zepon, C.S. Kiminami, W.J. Botta, C. Bolfarini
Invited talk Session 2[2] Abstract Roberto B. Figueiredo Microstructure and Hardness Evolution in Magnesium Processed by HPT Cláudio L. P. Silva, Isabela C. Tristão, Shima Sabbaghianrad, Seyed A. Torbati-Sarraf, Roberto B. Figueiredo, Terence G. Langdon 
Plenary talk Session 2 Abstract Terence G. Langdon Using severe plastic deformation to fabricate strong metal matrix composites Megumi Kawasaki, Byungmin Ahn, Terence G. Langdon
Plenary talk Session 2 Abstract Zenji Horita Upsizing of Severe Plastic Deformation Process under High Pressure Zenji Horita
Regular talk Session 2 Abstract Guilherme Zepon Characterization and Hydrogen Storage Behavior of High Entropy Alloys of the Mg-Zr-Ti-Fe-Ni-Co system G. Zepon, A. Bedoch, R.B. Strozi, T.T. Ishiwaka, D.R. Leiva, W.J. Botta
Regular talk Session 2 Abstract Jorge M. Cubero-Sesin Superplasticity of Ti-6Al-7Nb Alloys with Different Initial Microstructures Processed by High-Pressure Torsion J.M. Cubero-Sesin, J.E. González-Hernández, E. Ulate-Kolitsky, P. Navarro, J.R. Vega-Baudrit and Z. Horita
Regular talk Session 2 Abstract Mariana Calin Nanostructured biocompatible Ti-Nballoys processed by severe plastic deformation Mariana Calin, Matthias Bönisch, Ajit Panigrahi, Julia Kohler, Michael Zehetbauer, Jürgen Eckert
Invited talk Session 3[3] Abstract Glaura Goulart Silva LOW DIMENSIONAL FILLERS FOR NANOSTRUCTURED COMPOSITES G.G. Silva
Plenary talk Session 3 Abstract Luiz Antonio Pessan Highly filled synthetic clay-polymer nanocomposites produced by self-assembly techniques Nelson Marcos Larocca, Luiz Antonio Pessan
Invited talk Session 3 Abstract Carlos H. Scuracchio Morphological and Electromechanical Characterization of Artificial Muscles Based on Ionomeric Polymer-Metal Composites (IPMC) Carlos H. Scuracchio, Laos A. Hirano
Regular talk Session 3 Abstract Antonio Ferreira Avila From Molecular Vibration to Mechanical Properties: The Carbon Fiber/Epoxy Nano-Modified Composites Investigation N.C. Menezes, S. G. Leão, F. Lima, C.F. Silva, G. Arantes, M. G. Martins, A.F. Avila
Regular talk Session 3 Abstract Everaldo Carlos Venancio Synthesis and Chacterization of Polyniline/Graphene Oxide Nanocomposite H.G. Lemos, L.M.G. Silva, S.F. Santos, A. Duong, E.C. Venancio
Invited talk Session 4[4] Abstract Edgar Dutra Zanotto WHY CERTAIN GLASS FORMING LIQUIDS “NEVER” CRYSTALLIZE? Edgar D. Zanotto and Daniel R. Cassar
Invited talk session 4 Abstract Nicoleta Lupu Microstructure and Soft Magnetic Properties Evolution Versus Milling Conditions for FINEMET Submicron Powders L.C. Budeanu, L.C. Whitmore, G. Ababei, G. Stoian, H. Chiriac, M. Neagu, N. Lupu
Plenary talk Session 4 Abstract  A. L. Greer Extending the Range of the Glassy State:  Insights from Metallic Glasses A. L. Greer
Regular talk Session 4 Abstract Conrado Ramos Moreira Afonso HRTEM Unveiling In-situ Crystallization of Cu-Zr Glassy Thin Film obtained by Magnetron Sputtering C.R.M. Afonso, E. Joanni, J. Bettini, C.S. Kiminami
Regular talk Session 4 Abstract Daria BARSUK Nanoporous copper from binary Cu-Ca amorphous precursor by simple dealloying in water D. Barsuk, N. Panagiotopoulos, F. Charlot, Gilles Renou, A. M. Jorge Jr, Y. Champion 
Invited talk Session 5 Abstract Marcelo Falcão de Oliveira Evaluation of the glass-forming ability of alloys by molecular dynamics simulations M. F. de Oliveira
Invited talk Session 5[5] Abstract Simon Pauly Structural Heterogeneities In CuZr-based Bulk Metallic Glasses S. Pauly, K. Kosiba, B. Escher
Invited talk Session 5 Abstract Yannick Champion Deformation dynamics in Mg based metallic glass described by Poisson statistics Y. Champion, M. Laurent-Brocq , N. Thurieau
Invited talk Session 5 Abstract Luis Cesar Rodriguez Aliaga Molecular Dynamics Simulations on Glass Forming Ability and Mechanical Properties of Both Cu-Zr-(Al, Ti)  and Cu-Ni Metallic Glasses L. C. R. Aliaga, C. S. Schimidt, L. V. Lima, G. M. B. Domingues, I. N. Bastos
Plenary talk Session 5 Abstract Jürgen Eckert Perspectives on Structure Formation and Plasticity Improvement in Metallic Glasses J. Eckert
Regular talk Session 5 Abstract Konrad Franz Kosiba Designing the microstructure and mechanical properties of bulk metallic glass matrix composites by flash-annealing K. Kosiba, U. Kühn, A.L. Greer, J. Eckert, S. Pauly
Invited talk Session 6[6] Abstract Carlos Roberto Grandini Development of metastable β-type Ti alloys with low elastic modulus for biomedical application  R.O. Araújo, P.A.B. Kuroda, M.L. Lourenço, G.P.S. Suarez, F.F. Quadros, G.C. Cardoso, I.R. Rodrigues, B.L.T. Pedroso, D.R.N. Correa, F.B. Vicente, C.R. Grandini
Regular talk Session 6 Abstract ANTONIO CARLOS GUASTALDI Nanotoxicological issues, nanosegurance, regulatory issues and their implications: Nanoparticle Interactions with Biological Systems Antonio Carlos Guastaldi
Regular talk Session 6 Abstract Fanny HILARIO TiO2 nanotubes for biomedical applications: morphological, structural and electrochemical characterization F. Hilario, A.M. Jorge Jr, R.P. Nogueira, V. Roche
Regular talk Session 6 Abstract RODRIGO JOSÉ CONTIERI Decomposition and Phase Precipitation effects on Mechanical Properties near-eutectoid Ti-Cu Alloy R.J. Contieri, E.S.N. Lopes, A. Cremasco, D. Choudhuri, R. Banerjee, R. Caram
Invited talk Session 7[7] Abstract Eliana Navarro dos Santos Muccillo Sintering Kinetics of Nanostructured Gadolinia-Doped Ceria R. M. Batista, J. F. R. Naranjo, E. N. S. Muccillo
Invited talk Session 7 Abstract VARGAS-GARCIA JORGE ROBERTO Enhanced Catalytic Activity Induced by Ceria Nanotubes for Electro-oxidation of Methanol J.R. Vargas-García, C.F. Martinez-Tovar, J. Vazquez-Lujano, A.I. Cuesta-Balderas, S. Espinoza-Pacheco, A. Manzo-Robledo
Plenary talk Session 7 Abstract Rodrigo Moreno Colloidal synthesis and processing of nanostructured titania coatings R. Moreno, M. Borlaf
Regular talk Session 7 Abstract Marina Sparvoli Synthesis and deposition of graphene oxide films for solar applications M. Sparvoli, J. F. Monteiro, M. F. P. Silva
Regular talk Session 7 Abstract Ruth Herta Goldschmidt Aliaga kiminami MICROWAVE AND SPARK PLASMA SINTERING OF NANOSTRUCTURED PMN-PT/Fe2CoO4 C.P. Fernandez, D. Garcia, J. A. Eiras, R. H. G. A Kiminami
 Invited talk Session 8[8] Abstract Dilson S. Santos Hydrogen solubility and diffusivity in amorphous, nanocrystalline compounds and defective crystalline alloys A. V. Castilho; L. M. de Oliveira, T. R. B. Martins, L.  R. O. Costa , M. C. Brumm, S. C. Marques,  C. H. F, Marques ,  F. C. Salvio T. P. Sequeira and D. S. dos Santos
Invited talk Session 8 Abstract Claudemiro Bolfarini New Insights in the Formation of the Microstructure in Spray Forming of Aluminium Alloys: From Droplets to Dense Deposits Claudemiro Bolfarini
Invited talk Session 8 Abstract Ricardo Pereira Nogueira Sulfide Stress Corrosion Study of a Super Martensitic Stainless Steel in H2s Sour Environments: Metallic Sulfides Formation and Hydrogen Embrittlement M. Monnot, R.P. Nogueira, V. Roche, G. Berthomé, E. Chauveau, R. Estevez, M. Mantel
Invited talk Session 8 Abstract Walter Jose Botta Phase selection in several Al-based QC systems W. Wolf, R. Schulz, C. Bolfarini, C.S. Kiminami and W. J. Botta
Invited talk Session 8 Abstract José Federico Chávez Alcalá Synthesis and evaluation of hybrid SiO2 coatings for high temperature corrosion protection G. Flores-Pérez, L. Belly-González, L. Téllez-Jurado, J. F. Chávez-Alcalá
Invited talk Session 8 Abstract Fernando Audebert Metal-Metal Matrix Composites Fernando Audebert, Marina Galano, Yudong Liu, Luis Saucedo-Mora, James Marrow
Invited talk Session 9[9] Abstract DANIEL RODRIGO LEIVA Bibliometric Studies on Hydrogen Storage Materials D.R. Leiva, L. F. Chanchetti, S. M. O. Diaz, D. H. Milanez, L. I. L. Faria, T.T. Ishiwaka, W.J. Botta
Invited talk Session 9 Abstract Gabriel MEYER Using hydride forming materials for hydrogen compression, capture and/or purification G. Meyer
Invited talk Session 9 Abstract Jacques Huot Improvement of first hydrogenation of TiFe alloy by adding ZrMn2 L. Peng, J. Huot
Invited talk Session 9 Abstract Kaveh Edalati Design of New Metastable Hydrogen Storage Materials by Binding-Energy Engineering Kaveh Edalati, Ryoko Uehiro, Yuji Ikeda, Hai-Wen Li, Hoda Emami, Makoto Arita, Isao Tanaka,, Etsuo Akiba, Zenji Horita
Invited talk Session 9 Abstract Stefano Deledda Quaternary Mg-based Transition-Metal Complex Hydrides Produced by Reactive Milling S. Deledda, O. Zavorotynska, M.H.  Sørby, B.C. Hauback
Invited talk Session 10[10] Abstract Alberto Moreira Jorge Junior Nanoporous Cobalt Applied as Catalyst in Ammonia Borane Fuel  Daria Barsuk, Anicet Zadick, Yaofeng Guo, Nikolaos T. Panagiotopoulos, Yannic Champion, Marian Chatenet, Alberto M. Jorge Jr.
Invited talk Session 10 Abstract Alexander Hiroshi Kasama Potential of Nanostructured Materials in Oil and Gas Industry A.H. Kasama, L.M.X. Lowe, A.M. Oliveira, L.C.M. Meniconi, G.G. Silva, C. Bolfarini, J.D. Ambrósio, C.R. Rambo
Invited talk Session 10 Abstract Andre Luiz Vasconcellos da Costa e Silva Stability and metastability in computational thermodynamics- Challenges and opportunities in the development of novel metallic alloys A. Costa e Silva
Invited talk Session 10 Abstract Santiago José Alejandro Figueroa Materials characterization using Synchrotron Techniques: Current Capabilities and Future Possibilities S.J.A. Figueroa
Invited talk Session 10 Abstract Gavin Vaughan Diffraction-Based Characterization of Local Structure In Three Dimensions Under Operand Conditions And In Real Time G.B.M. Vaughan
Regular talk Session 10 Abstract Mariana Coutinho Brum HYDROGEN UPTAKE ENHANCEMENT BY THE USE OF A MAGNESIUM HYDRIDE AND CARBON NANOTUBES MIXTURE R. Vasconcelos, S.S. Camargo Jr, M.C. Brum, D. S. dos Santos
Regular talk Session 10 Abstract Milton Sergio Fernandes de Lima Surface modification of Ti6Al4V alloy by pulsed lasers: microstructure and hydrophobic behavior M.S.F. Lima, I.A. Almeida
Regular talk Session 10 Abstract Neville Clark Room Temperature Formation of a Low Resistivity Layer at the Interface of Titanium Thin film on Glass Substrates Hugo Solis, Neville Clark, Daniel Azofeifa, E. Avendano

Sunday, 19/03/2017
Session 1 (17:45 – 19:20): Applications of Metastable and Nanostructured Materials
Monday, 20/03/2017
Session 2 (8:30 – 10:30): Severe plastic deformation

Monday, 20/03/2017
Session 3 (11:00 – 12:30): Nanostructured polymers and composites

Monday, 20/03/2017
Session 4 (14:00 – 16:00): Structure and properties of glasses

Tuesday, 21/03/2017
Session 5 (8:30 – 10:30): Metallic glasses and composites

Tuesday, 21/03/2017
Session 6 (11:00 – 12:30): Biomedical applications and Ti-based Alloys

Tuesday, 21/03/2017
Session 7 (14:00 – 16:00): Nanostructured ceramics

Wednesday, 22/03/2017
Session 8 (8:30 – 10:30): Metastable Al-alloys and hydrogen embrittlement

Wednesday, 22/03/2017
Session 9 (11:00 – 12:30): Hydrogen storage

Wednesday, 22/03/2017
Session 10 (14:00 – 16:20): Metastable and nanostructured materials: characterization, processing and applications